Cuts through objects
i am not able to figure out cause it seems like it shouldn't be happening. I am uploading to pictures the file that is labeled Julian is my workstation and they area is circled that i am wondering about because you can see a sleeve object and a hole that goes through the assembly. the second picture jake shows a similar picture of the same assembly but the extrude-cut through the assembly does not go past the top piece. i have highlight a liner right below to show there where the cut is and where the cut is not.
So here is my question why on one work station the cut-extrude work and on another one it does not work?
So here is my question why on one work station the cut-extrude work and on another one it does not work?
Views: 54
- Attachments:
-
-
Julian.bmp, 3.7 MB -
Jakes seat.bmp, 2.8 MB
-
Replies to This Discussion
-
Permalink Reply by Mark Treadwell on -
Check the feature scope...
Edit feature, look near the bottom of the feature manager. Select "All bodies", or if you need to limit which bodies are cut, select "Selected bodies", turn Auto-Select off, and make sure the appropriate components are selected.
-
Permalink Reply by Deepak Gupta on -
Mark has suggested the best way out. I would like to add another thing here. Please use JPEG format when you uploading picture. The size of the pics will be very small as compared to BMP.
-
Permalink Reply by Julian Zapata on -
yeah sorry about the size of files. But i had already tried marks suggestion it didn't work either. it is weird because on my computer it will cut it through both ways and show up when the other machine opens it up but once he saves it is gone again. thanks guys.
-
Permalink Reply by Deepak Gupta on
-
Can you upload the files.Make sure to supress the parts/features and zip the files before uploading.
Connect to other SolidWorks Geeks throughout the world.... Share tips, tricks and ideas...Learn to master SolidWorks.
Birthdays
© 2012 Created by Alex R. Ruiz.
Powered by
