I need Help

Replies to This Discussion

Permalink Reply by Deepak Gupta on August 16, 2010 at 4:39am

Dan, not sure how easy it'll be get the details you looking for. Any specific reason for this particular project.

If you can use picture, then try Picture Sketcher in SolidWorks. Insert he pictures in an open sketch and sketch the outlines and then finally make up the models.

• ▶ Reply

Permalink Reply by Deepak Gupta on August 16, 2010 at 4:42am

Check this if it helps Barrett M107 .50

• ▶ Reply

Permalink Reply by Daniel on August 16, 2010 at 4:10pm

wow really thx a lot for the tip with the sketches, ill try that up, and we chose the project because i like sniper rifles, and we wanted to do something diferent, you see, in that particular class, all they do as projects are engines and stuff like that, legos aswell so we wanted to do something cool if you can say so. ill ask you anything if i get trouble with the pictures, what type of picture you recommend me to use, because i have the assembly manual with me, i downloaded it but still i need the dimensions of each part. so thx

Deepak Gupta said:

Dan, not sure how easy it'll be get the details you looking for. Any specific reason for this particular project.

If you can use picture, then try Picture Sketcher in SolidWorks. Insert he pictures in an open sketch and sketch the outlines and then finally make up the models.

• ▶ Reply

Permalink Reply by Deepak Gupta on August 16, 2010 at 7:31pm

No problems. JPG with front/side views will be best to use (and then you may not need the dimensions). Can you send in the assembly manual just to see what you have in the box.

• ▶ Reply

Permalink Reply by Daniel on August 16, 2010 at 9:22pm

yea sure how can i send it to you, and i dont know if its much to ask, if u can send me a lil sketch of it in solidworks just to see how it is done, im using solidworks 2010.

Deepak Gupta said:

No problems. JPG with front/side views will be best to use (and then you may not need the dimensions). Can you send in the assembly manual just to see what you have in the box.

• ▶ Reply

Permalink Reply by Daniel on August 16, 2010 at 9:24pm

here i sen you the assembly image, the second file is the manual, u need to read it as pdf, and the asembly part in the manual is at the bottom of the manual, thx.

Daniel said:

yea sure how can i send it to you, and i dont know if its much to ask, if u can send me a lil sketch of it in solidworks just to see how it is done, im using solidworks 2010.

Deepak Gupta said:

No problems. JPG with front/side views will be best to use (and then you may not need the dimensions). Can you send in the assembly manual just to see what you have in the box.

Attachments:

• barrettm82a1partsdn9.gif, 192 KB
• Manual-95.pdf, 1 MB

• ▶ Reply

Permalink Reply by Deepak Gupta on August 18, 2010 at 9:31pm

Check this one Sketch Picture

• ▶ Reply

Permalink Reply by Daniel on August 18, 2010 at 10:26pm

What do you think about the things i sent you?

Deepak Gupta said:

Check this one Sketch Picture

• ▶ Reply

Permalink Reply by Deepak Gupta on August 19, 2010 at 1:26am

Design is good but don't have much information. You might have to assume lot of dimensions and feature. If you get more detailed pictures (front and side view), they'll be best to model the parts/assembly in much easier view.

• ▶ Reply

Permalink Reply by Daniel on August 19, 2010 at 10:11pm

ok ill try that thx

Deepak Gupta said:

Design is good but don't have much information. You might have to assume lot of dimensions and feature. If you get more detailed pictures (front and side view), they'll be best to model the parts/assembly in much easier view.

• ▶ Reply

▶ Reply to Discussion