Section Properties Problem
This is something thats baffling me as Ive NEVER had this problem before....
Im in a drawing and I cut the section I needed, and normally, id set my section depth to only a few inches.
I cant seem to find my option to do that anymore.
I attached a Screen shot of my Section property manager so you don't all think im crazy lol
Im still running 2.1 should i upgrade and see if the problem fixes?
Im in a drawing and I cut the section I needed, and normally, id set my section depth to only a few inches.
I cant seem to find my option to do that anymore.
I attached a Screen shot of my Section property manager so you don't all think im crazy lol
Im still running 2.1 should i upgrade and see if the problem fixes?
Views: 2
- Attachments:
-
-
Section Property problem.JPG, 194 KB
-
Replies are closed for this discussion.
Replies to This Discussion
-
Permalink Reply by Jacob Scholan on -
never ind... apparently its only in Assembly Drawings you can control your section depth. Thats pretty dumb.
-
Connect to other SolidWorks Geeks throughout the world.... Share tips, tricks and ideas...Learn to master SolidWorks.
Birthdays
© 2012 Created by Alex R. Ruiz.
Powered by
